FPFF exit exam questions and answer quiz contain questions Answer
If you find any questions incorrect, please let us know by Clicking here.
1. Oxygen powered
resuscitator is driven by pressurized gas delivered by a regulator, and can be
either automatic or manually controlled
a) True
b) False
2. Fire is characterized by
a) Reduction
b) Oxidation
c) Heat
d) Corrosion
3. Designated fire exists will always be
marked with a green EXIT sign and will be lit from within to insure visibility
a) True
b) False
4. In case of fire on the electrical motor the first thing to do is
a) Call the electrician
b) Extinguish the fire with water spray
c) Sound the alarm, stop the motor and
extinguish using CO2
d) Extinguish using a foam extinguisher
5. The Continuous
burning of Fire is represented in fire tetrahedron by addition of
a) Chain supply
b) Chain reaction
c) Chain inhibition
d) Chain prevention
6. A fire is said to be under control when
a) It stops spreading
b) No smoke is seen
c) When the temperature of the side wall remains cool and steady
d) Flame is knocked off
7. Where on board would you find out
which fire sections are enclosed by 'A 'or 'B' class division
a) A fire involving liquids or liquefied
solids
b) A fire involving solid materials
c) Afire involving gases
d) A fire involving metals
8. What is fuel's role in making a fire?
a) It is the combustible material that
burns
b) it is the food that gives your body energy
c) it is one thing you don't need to make fire
9. The primary function of a fire door is
to safe exit in case of fire
a) True
b) False
10. Thermal value is the amount of heat
released by a unit mass of fuel
a) True
b) False
11. Fire class A type is
a) Metals
b) Liquids
c) Electrical equipment
d) None of above
12. An "A" class fire is fueled by
a) Wood, paper cloth, trash, plastics
b) Flammable liquids: gasoline, oil, grease, acetone
c) Electrical: energized electrical equipment
13. Class C fire extinguishers are used to
put out combustible metal and metal alloy fires
a) True
b) False
14. Radiation is the
transfer of heat through the physical movement of particles from hotter to colder zone
a) True
b) False
15. What type of fire extinguisher should
be used to douse a fuel-based fire?
a) Carbon Dioxide
b) Water
c) Foam
d) Wet chemical
16. When is it required for portable carbon
dioxide fire extinguishers to be recharged?
a) At least once each year
b) Each time the vessels dry docks
c) When the charged weight decreases by 50%
d) Whenever used for demo or to fight fire on board ship
17. What type of fire extinguisher should
you use in order to extinguish a fire caused by solid materials, such as wood,
paper or textile?
a) Carbon Dioxide
b) Water
c) Foam
d) Wet Chemical
18. Class B fire division have the
insulation such that the average temperature raise in the un exposed side will
be not more than 140 degree C within the time
a) True
b) False
19. Metal fire is classified as class C
fire
a) True
b) False
20. A self-contained breathing apparatus
a. It is used for deep sea diving
b. Contains oxygen
c. It is used for entry
into enclosed spaces
d. Is connected to the deck air line
21. The weight of a portable fire
extinguisher is not more than
a) 9 kg
b) 23 kg
c) 13.5 kg
d) 5 Kg
22. Putting fire out by removing fuel is called inhibition
a) True
b) False
23. Why should a CO2 extinguisher be used
with caution in confined areas
a) it will displace the air and reduce
the amount of oxygen available
b) It will increase the oxygen present in the confined area to a dangerous level
c) it will not operate effectively in confined areas
d) It may explode when exposed to heat
24. For fighting fire on the deck of a
tanker system used is
a) Low expansion foam
b) High expansion foam
c) DCP
d) CO2
25. Smothering is the method of firefighting by limitation of
a) molecular chain reaction
b) Temperature
c) Fuel
d) air
26. Emergency fire pump is located in the engine room
a) True
b) False
27. An exit route of
three parts: the exit access, exit, and exit discharge
a) True
b) False
28. The best way to combat an engine
room bilge fire is through the use of
a) dry chemical extinguisher and solid stream water
b)
Foam extinguisher and low velocity water fog
c) foam extinguisher and solid stream water
d) foam and soda acid extinguishers
29. What type of release is allowed for
fixed gas fire extinguishing installation onboard
a) Any automatic release system
b) A manually operated release only
c) An automatic release system activated by fire alarms
d) An automatic release system
activated by fire detectors
30.In the case of Direct Reduced Iron
(DR) cargo in the hold, contact with water may lead to vigorous re-oxidation
accompanied by the evolution of heat and hydrogen which may give rise to the
risk of explosion
a) True
b) False
